🛠️ Easy Installation – Video Below!
This aluminum sandwich plate makes it simple to install your Oil Pressure and Oil Temperature senders—no drilling or tapping required. Just:
- Remove your oil filter.
- Screw the plate on in its place.
- Reinstall the filter on top of the plate.
- Install your senders into the available ports.
The plate includes (4) 1/8″ NPT fittings, 4 plugs, an O-ring gasket, and installation instructions. It can rotate 360° to help you find the ideal orientation for sender clearance.
⚠️ Fitment & Notes
- If unsure about sizing, please call or email us.
- Designed for spin-on oil filters only.
- Plate adds 29mm (1.15″) to your oil filter length—check clearance, especially on vehicles like the WRX, which may require heat shield modification.
🔩 Center Nut Torque Specs
- Torque: 23 ft-lbs
- Nut Size: 26mm (1″)
📋 Size Options & Vehicle Compatibility
Here are baseline fitment suggestions. For exact compatibility, please call us Mon–Fri, 9 AM–5 PM EST.
🔧 M20 x 1.5
- Subaru
- Non-metric Honda
- Mitsubishi, Acura
- Hyundai
- Nissan Sentra 2.5L, 350Z
- Mazda RX-7, RX-8
- Porsche
- Honda S2000
*Note: Some modification may be required for 2006–2007 WRX TR edition. Consider our Remote Oil Pressure Kit as an alternative.
🔧 M22 x 1.5
- Mazda 6 (V6)
- Ford 6.8L Super Duty, 4.0L Mustang, Explorer, Sport Trac
- Mustang GT 4.6L, F-Series 5.4L
- Metric Honda Civic/CRX
- Some Metric Chevy and Ford models
🔧 3/4 UNF-16
- Mazda (with spin-on conversion)
- Nissan, VW, Ford, BMW
- Scion, SRT-4, SR20, Toyota, Jeep
Compare Long Shaft Version ›
🔧 3/4 UNF-16 – Long Shaft
- Toyota Celica
- Scion tC, MR2
- Lexus IS300 (2JZ-GE)
🔧 13/16 UNF-16
- Most early Chevy 4/6/8 cyl. (305, 5.0, 5.7)
- Some Buick, Pontiac, Oldsmobile
- Does not fit big blocks or Gen 1 350.
🔧 M18 x 1.5
- Some Pontiac and Chevy 5.7L
🔧 Sensor Installation Tips
- NPT threads are tapered—tighten by hand, then turn 3/4 to 1.5 turns more.
- Some exposed threads are normal and necessary for sealing.
- Use Teflon tape or Loctite on the threads for a proper seal.
- Do not overtighten or you may damage the threads.
📹 Installation Video
- Watch the Install Guide
Reviews
There are no reviews yet.